Table of Contents
Toggle제품설명서 번역에 대해서 알아 보겠습니다(한영번역)
.
제품설명서 번역(한국어 원본)템코라인 제품의 T50 시리즈를 구입해 주셔서 대단히 감사합니다. |
제품설명서 번역(영어 번역본)Thank you for purchasing the T50 series from Temcoline. The T50 series is a precision industrial controller that uses an advanced 2 degree-of-freedom (DOF) algorithm. The T50 series consists of 5 models, which are T52, T53, T54, T57, and T59. This manual explains the installation, the functions, the operation, and the handling of the products. Please read the manual thoroughly before using the products. If any difficulties arise while using our products, please call our customer service at 1588-5439. – Please pay attention to the following while using this product. Use the products under the conditions specified in this manual. Please heed the cautions and warnings listed in this manual. The contents of the manual may be changed without notice. The product is designed to be used installed on a control panel. This manual is copyrighted, and may not be copied in part or in whole without permission. The manufacturer takes no responsibility for direct or indirect damages caused by careless operation or operation under unpredictable or risky environments. Safety cautions are intended to prevent accidents and dangers through the proper use of the products, so please heed them at all times. The safety instructions are divided into cautions and warnings, which indicate the following. 1. Use a separate safety device when this product is used to control a device that could harm lives or expensive property in the event of a malfunction or a breakdown. (This may cause fires, deaths, or damage to property) 2. Please conduct an inspection when water has entered the product (as it poses the risk of short circuits, fires, and malfunction). * The T50 series has multiple inputs, which may be set and changed by the user. * The figure on the left uses the terminal socket of T57-S20 as an example to illustrate the output response relationship. Summary and explanation of output settings 1. This is a simple on/off control, mainly used to control cooling devices. (Rarely used currently) 2. This is the most widely used setting, and the default value at the point of manufacture. 3. This setting is used mainly with thyristor power regulator (TPR) modules, and is capable of precision control. 4. This is the most cost-efficient method of implementing PID control and is used mainly with magnetic switches (electric switches). However, it may wear the contact point, and is difficult to use in places that require fast response. |
.
이상 대한전기에서 의뢰한 온도조절계 제품설명서 번역(한영번역)의 일부를 살펴 보았습니다.